Filter
Top Products
10
The motor does not
run after being
switched on.
The motor is running
with loud noise and
shaking.
The motor overheats
causing the power to
automatically shut off.
Juice splashes from the
rim of the receptacle.
Machine is running, but
no juice is coming out.
• Check to see if unit is plugged in.
• Locking bar is not locked in place properly.
• Check if all parts are assembled properly.
• Check if there is any residue left between blade and receptacle.
• Make sure pulp collector is properly assembled as the safety
MicroSwitch will cause the unit not to operate if pulp collector
is not in place.
• Check filter/blade is secured firmly in place.
• Check that all parts are assembled properly and in the
correct position.
• Juicing overripe fruit may result in too much pulp and will
clog the filter. Turn machine off and clean the filter.
• The motor needs to warm up for 10 seconds before use.
• The fruits and vegetables may be soft or overripe.
• There may be too much pulp in the filter. Turn machine off
and clean the filter.
• Motor stops running due to the built-in feature, the overheat
safety control.
• This is normal.
• Check spout to make sure it is the down position. The juice
will not come out if spout is in the upright position.
TROUBLESHOOTING
Problem
Possible Reasons and Solution