Filter
Top Products
34
SECTION 6: PARTS SECTION
RINSE TANK & COMPONENTS
JPX-300NSU Technical Manual
7610-002-75-96 Rev. E (08/16/2005)
40
°F Rise
70
°F Rise
Volts Hz Phase Rinse Heater (8.2 KW) Rinse Heater (10 KW)
460 60 3 4540-111-51-46 4540-002-29-82
Thermostat, High Limit
5930-011-49-43
Decal, High Limit
9905-011-84-32
Thermostat, Rinse Tank
5930-121-71-29
Decal, Thermostat Regulating
9905-011-84-31
Dielectric Cover
5700-011-40-50
Thermostat Mounting Bracket
5700-*011-81-64
The thermostat attaches with 2:
Screw, 6-32 x 3/8” Sems w/External Tooth Washer
5305-002-25-91
Rinse Tank Weldment
5700-002-71-00
Secured with: Locknut, 1/4”-20 S/S Hex with Nylon Insert
5310-374-01-00
Gasket, Heater
5330-011-47-79
Fitting, 1/4” Imperial Brass
5310-924-02-05
Nut, 5/16”-18 S/S Hex
5310-275-01-00
Lockwasher, 5/16” Split
5311-275-01-00
The JPX-300NSU comes supplied with various heaters, depending on the characteristics of the machine. To ensure that you
order the correct heater for the model you are servicing, please refer to the following table: