Tempstar/HH GPX Series Technical Manual 7610-002-57-32
Issued: 07-24-2006 Revised: N/A
SECTION 6: PARTS SECTION
TUB ASSEMBLY (CONTINUED)
35
ITEM QTY DESCRIPTION Mfg. No.
1 1 Tub Weldment, Tempstar GPX 05700-002-57-03
1 1 Tub Weldment, Tempstar HH GPX 05700-002-63-13
2 1 Rack Assembly 05700-002-01-00
3 2 Bulk Head Plug 04730-609-05-00
4 1 Gasket 05700-111-35-03
5 1 O-ring 05330-400-05-00
6 4 Bolt, Hex 3/8”-16 x 1 1/4" Long 05305-276-10-00
7 1 Lower Wash Manifold Weldment, Tempstar GPX 05700-031-46-00
7 1 Lower Wash Manifold Weldment, Tempstar HH GPX 05700-002-21-70
8 1 Suction Strainer Weldment, Tempstar GPX 05700-001-22-23
8 1 Suction Strainer Weldment, Tempstar HH GPX 05700-002-16-13
9 1 Suction Strainer Bracket, Tempstar GPX 05700-001-22-24
9 1 Suction Strainer Bracket, Tempstar HH GPX 05700-002-18-28
10 8 Locknut, 1/4"-20 with Nylon Insert 05310-374-02-00
11 1 Strainer Weldment 05700-021-50-07
12 1 Wash Overflow Weldment 05700-001-25-69
13 1 Overflow Support Bracket 05700-001-27-55
14 1 O-Ring 05330-400-05-00
15 2 Clamp, Hose 1 5/16” to 2 1/4” 04730-719-01-37
16 1 Discharge Hose 05700-011-88-24
17 1 Nipple 05700-021-34-84
18 1 Pump Support Bracket Assembly, Tempstar GPX 05700-002-00-46
18 1 Pump Support Bracket Assembly, Tempstar HH GPX 05700-002-22-73
19 1 Clamp, Hose 5 5/8" to 6" 04730-011-34-90
20 1 Connector, 1/2” 90° 05975-111-01-00
21 4 Nut, 3/8"-16 S/S Hex 05310-276-01-00
22 4 Lockwasher 3/8” 05311-276-01-00
23 1 Fitting, Olflex 05975-205-43-00
24 1 Union, 1/4” 05700-001-16-52
25 1 Clamp, 1/8" Nylon 05975-601-10-15
26 1 Locknut, 6-32 with Nylon Insert 05310-373-03-00
27 4 Locknut, 10-24 with Nylon Insert 05310-373-01-00
28 1 Cover, Wash 05700-031-47-57
29 1 Decal, Warning-Disconnect Power 09905-100-75-93
30 1 Kit, Thermostat Regulating, Tempstar GPX 06401-003-18-25
30 1 Kit, Thermostat Regulating, Tempstar HH GPX 06401-003-18-27
31 1 Fitting, 1/4" Imperial Brass 05310-924-02-05
The Tempstar models covered in this manual come supplied with various wash motor assemblies (a wash motor assembly
includes the wash motor and the pump end), depending on the characteristics of the machine. To ensure that you order the
correct wash motor assembly for the model you are servicing, please refer to the following table:
Model Volts Hz Phase Wash Motor Assembly
Tempstar GPX 208 60 1 06105-121-35-18
Tempstar GPX 230 60 1 06105-121-35-18
Tempstar HH GPX 208 60 1 06105-002-01-29
Tempstar HH GPX 230 60 1 06105-002-01-29
Important note: When servicing a wash
motor, it is important to refer to the wiring
schematic found on the motor, to ensure
that the motor is wired correctly. Different
manufacturers of motors may not use the
same wire color codes and therefore, your
new motor, which may have been built by
someone different than who built your orig-
inal motor, may not connect using the same
wires. Always refer to the wiring diagrams
on the motor you are installing. If the motor
you are installing has had the schematic
removed, contact Jackson MSC immedi-
ately for technical support.