Filter
Top Products
Tempstar LT/NB/S Technical Manual 7610-003-61-42 B
Issued: 10-08-2008 Revised: 04/22/2009
SECTION 1: SPECIFICATION INFORMATION
OPERATING CAPACITIES
PERFORMANCE/CAPABILITIES
OPERATING CAPACITY:
(HIGH TEMPERATURE)
RACKS PER HOUR
58
DISHES PER HOUR
1450
GLASSES PER HOUR
1450
(LOW TEMPERATURE)
RACKS PER HOUR
50
DISHES PER HOUR
1250
GLASSES PER HOUR
1250
OPERATING CYCLE (SECONDS):
MINIMUM (OTHER CYCLE TIMES ARE AVAILABLE)
(HIGH TEMPERATURE)
WASH TIME
40
RINSE TIME
13
DWELL TIME
4
TOTAL CYCLE TIME
57
(LOW TEMPERATURE)
WASH TIME
45
RINSE TIME
11
DWELL TIME
10
TOTAL CYCLE TIME
66
TANK CAPACITY:
WASH TANK (GAL)
8.0
WASH TANK (L)
30.3
RINSE TANK (TEMPSTAR) (GAL)
3.0
RINSE TANK (TEMPSTAR) (L)
11.4
STEAM REQUIREMENTS:
COIL SIZE
3/4”
STEAM FLOW PRESSURE (P.S.I.)
10-20
CONSUMPTION @ 15 P.S.I. (LBS/HR)
45
ELECTRICAL REQUIREMENTS
WASH MOTOR HP
3/4
NOTE: Always refer to the machine data plate for specific
electrical and water requirements. The material provided
on this page is for reference only and may be subject to
change without notice.
WATER REQUIREMENTS
TEMPSTAR:
WASH TEMPERATURE (MINIMUM)(
°F)
150
WASH TEMPERATURE (MINIMUM)(°C)
66
RINSE TEMPERATURE (MINIMUM)
(
°F)
180
RINSE TEMPERATURE (MINIMUM)(°C)
83
INLET WATER TEMPERATURE:
12KW RINSE HEATER
(
°F)
140
12KW RINSE HEATER
(
°C)
60
14KW RINSE HEATER
(
°F)
110
14KW RINSE HEATER
(
°C)
44
FLOW PRESSURE (PSI)
10
WATER LINE SIZE (NPT)
1/2”
DRAIN LINE SIZE (NPT)
1 1/2”
TEMPSTAR LT:
WASH TEMPERATURE (MINIMUM)(
°F)
130
WASH TEMPERATURE (MINIMUM)(°C)
55
RINSE TEMPERATURE (MINIMUM)
(
°F)
130
RINSE TEMPERATURE (MINIMUM)(°C)
55
INLET WATER TEMPERATURE
(
°F)
130
INLET WATER TEMPERATURE
(
°C)
55
FLOW PRESSURE (PSI)
10
WATER LINE SIZE (NPT)
1/2”
DRAIN LINE SIZE (NPT)
1 1/2”
MINIMUM CHLORINE REQUIRED (PPM)
50
TEMPSTAR NB/TEMPSTAR S:
WASH TEMPERATURE (MINIMUM)(
°F)
150
WASH TEMPERATURE (MINIMUM)(°C)
66
RINSE TEMPERATURE (MINIMUM)
(
°F)
180
RINSE TEMPERATURE (MINIMUM)(°C)
83
INLET WATER TEMPERATURE
(
°F)
180
INLET WATER TEMPERATURE
(
°C)
83
FLOW PRESSURE (PSI)
10
WATER LINE SIZE (NPT)
1/2”
DRAIN LINE SIZE (NPT)
1 1/2”
2