Filter
Top Products
Tempstar LT/NB/S Technical Manual 7610-003-61-42 B
Issued: 10-08-2008 Revised: N/A
SECTION 5: PARTS SECTION
TEMPSTAR INCOMING PLUMBING/OUTLET PLUMBING ASSEMBLY/WPRK KIT OPTION
37
ITEM
QTY
DESCRIPTION
Mfg. No.
1
1
Water Pressure Regulator, 1/2" NPT
05700-100-04-07
2
1
Valve, Ball, 1/4" NPT
04810-011-72-67
3
1
Gauge, Pressure, 0-100 PSI
06685-111-88-34
4
1
Tee, Brass, 1/2" NPT x 1/2" x 1/4"
04730-411-25-01
5
1
Valve, Solenoid, 1/2" NPT
04730-100-09-18
6
2
Bracket, Booster Plumbing 1/2” (Not Shown)
05700-003-60-90
7
2
Bushing, HEX 3/4 MNPT-1/2 FNPT Brass
04730-002-56-27
8
3
Union, 1/2”
04730-406-01-01
9
2
Adapter, 1/2” MNPT x CU Male
04730-011-59-53
10
1
Tube, Copper
See Chart
11
3
Elbow, 1/2" CU x CU, 90
04730-406-01-01
12
6
Adapter, 1/2”
04730-401-03-01
13
1
Tube, Copper
See Chart
14
1
Vacuum Breaker, 1/2" NPT
04820-003-06-13
15
1
Tube, Copper
See Chart
16
1
Elbow, 1/2" NPT, 90
, Brass
04730-011-42-96
17
3
Tube, Copper
See Chart
18
1
Tube, Copper
See Chart
19
2
Tube, Copper
See Shart
When servicing plumbing components, take care not to damage the threads of each individual item. Damaged threads can
cause leaks and loss of pressure, which could adversely effect the performance of the Tempstar dishmachine. It is strongly rec
-
ommended that teflon thread tape, used in conservative amounts, be applied to threads when joining components together. It
is not advised to use thread sealing compounds, sometimes referred to as “pipe dope”. Compounds can be ejected from the
threads during the tightening process and become lodged in key components, thereby rendering them useless. Some of the
components include the solenoid valve and the pressure gauge isolation ball valve.
Water Arrestor, 1/2”
06685-100-05-00
Tee, 1/2” x 1/2” x 1/2”
04730-211-27-00
Nipple, 1/2” NPT, Close, Brass
04730-207-15-00
WPRK KIT OPTION