Filter
Top Products
The grill accessory consists of two black grill grates, a grill element and a grill liner pan.
7........._;"_='i"t'/I
To Install Grill
1. Before installing grill components, be certain surface controlsare OFF.
2. Placethegrilllinerpanintoanemptybasinpanwrihtheopeningnext totheterminal
block. The grill liner pan must be used since it supports the grill element.
3. Positionthe grill element with the terminal plug towards the terminal receptacle.
Slide the element towards the receptacle until the terminal p)ug is completely
engaged. The grill element should rest flat on the side ledges of the grill liner pan.
4. Place the black grill grates on the top of the basin pan.
Note Model CVEX4370: The right hand cooking bay accepts cooktop cartridges and
griddle only.
To Remove Grill
1. Remove grill components once they are cool. Be sure control switches are in the
OFF position.
2. To remove grill element, lift the side at the ventilation chamber until the top of the
element isabout V2inch above the cooktop. (Note: Lifting the element too high while
still engaged in the receptacle could damage the terminal plug.) To disengage
terminal, slide away from the terminal receptacle. Lift out when fully unplugged.
Grill Covers
1. Grill covers can be usedto cover the grill, when not in use, or an empty basin pan.
2. To remove the grillcovers, push downon frontor rear side. The oppositeside will
lift slightlyfor easy removal
8