Filter
Top Products
Removable Utensil Basket
(Design varies by model)
Split & Fit TM Utensil Basket
The split silverware basket can be separated and placed into
the bottom rack in several locations. Hold the basket firmly
and slide it apart until it splits into 2 baskets. Load flatware
and utensils into both sections or just one, depending upon
your load.
For best cleaning results, prevent items from nesting
together by placing some items in the basket with handles
up and some with handles down. Load knives, handles up,
through the slots in the hinged covered section(s) (when
closed).
Be sure that thin, finely pointed items do not extend
through the basket. This could block the lower wash arm.
Small, lightweight items like baby spoons and plastic measur-
ing spoons should be placed in the section(s) with the hinged
cover(s).
Odds & Ends Basket "\
Use this supplemental basket in the upper rack for loading '___\l_h__
miscellaneous items and utensils. This is also a safe place to _,a__._es__,,_>_-
load sharp knives and pointed items. ___
Removing the Upper Rack
The upper rack can be removed when tall or oversized items
need to be loaded into the lower rack.
[Note:Avoidrestingitemsoverthecenterwashtower. ]
To remove:
¢_'Roll the upper rack 1/3 to 1/2 of the way out. Rack
_ Remove the plastic rack stop from the end of each
track. To remove each plastic rack stop, push inward
(towards the rack) on the ridged area of the rack stop.
The rack stop will snap open and can be easily
removed by pulling straight out. Take care to support
the track while removing rack stops.
Roll the rack all the way out of the track and remove
from the dishwasher.
4_Reverse the above procedure to replace the upper
rack into the dishwasher.