Filter
Top Products
/9 Care and Cleaning
After Self-Cleaning 7. When the clean time has been completed, the indicator
word CLEAN will turn off. The indicator word LOCK will
About one hour after the end of the clean cycle, the lock remain on until the oven has cooled. When the oven has
will disengage and the LOCK indicator word will turn off. cooled, the indicator word LOCK will turn off andthe door
At this point, the door can be opened, will automatically unlock.
Some soil may leave a light gray, powdery ash which can be
removed with a damp cloth. If soil remains, it indicates that TO Cancel Self-Clean
the clean cycle was not long enough. The soil will be re-
moved duringthe next clean cycle. 1. Press the Stop/Clear pad. The door will be locked while
the LOCK indicator word remainsin the display.
If the oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and embossed rack Depending on the length of time the oven had been
supports with a small amount of vegetable oil to restore ease cleaning, it may take up to an hour for the oven to cool
of movement, down. When the oven is cool, the door will automatically
unlock and it can be opened.
To Delay the Start of a Clean Cycle
1-3. Follow steps 1-3 on page 18.
4. Press the Stop Time pad. Indicator words STOP TIME
will flash in the display and the calculated stop time will
also appear in the display.
5. Press the appropriate number pads to enter the stop time
you desire. (A stop time can only be accepted for later in
the day.)
Example: If at 9:00 you set the oven to clean for three
hours, the calculated stop time would be "12:00". The
display will show:
?ZI. t-u-i
It._. LJl_l
LOCK
STOPTIME CLEAN
If you want the stop time to be 1:00, press the number pads
"1,0,0". Four seconds later the display will show 1:00 and
the indicator word DELAY.
6. When the oven begins to clean, the clean icon (top and
bottom bars) will come on. The indicator word DELAY
will go off.