Filter
Top Products
15
■ Test baked goods for doneness a few minutes before the
minimum cooking time with a method such as using a
toothpick.
■ Use a meat thermometer or the temperature probe (on some
models) to determine the doneness of meats and poultry.
Convect Bake
(on some models)
Convect Bake can be used to bake and cook foods on single or
multiple racks. It is helpful to stagger items on the racks to allow
a more even flow of heat. If the oven is full, extra cooking time
may be needed.
When cooking an oven meal with several different types of foods,
be sure to select recipes that require similar temperatures.
Cookware should sit in the oven with at least 1" (2.5 cm) of space
between the cookware and the sides of the oven.
Allow the range to preheat before placing food in the oven.
During convection baking preheat, the broil elements and the
bake element all heat the oven cavity. After preheat, the
convection element will cycle on and off in intervals to maintain
oven temperature, while the fan constantly circulates the hot air.
If the oven door is opened during convection baking or
preheating, the convection element and fan will turn off
immediately. They will come back on once the door is closed.
■ Reduce recipe temperature 25°F (14°C). The cook time may
need to be reduced also.
To Convect Bake:
Before convection baking, position racks according to the
“Positioning Racks and Bakeware” section.
1. Press CONVECT.
2. Select CNVT BAKE using the left Quickset pad.
3. Select the oven temperature using the Quickset pads.
OR
Press the number pads to enter a temperature. The
temperature can be set between 195°F and 550°F (91°C and
288°C) in 5° increments when Auto Convect is on. If Auto
Convect is off, temperature can be set from 170°F (77°C).
4. Press ENTER.
After 3 seconds, the oven will begin to preheat. “CNVT
BAKE” and “PREHEAT” will appear in the display along with
100° or the actual oven temperature, whichever is higher.
The temperature in the display will increase in 1° increments
until the oven reaches the preset temperature. Allow about
15 minutes for the oven to preheat.
When the oven is preheated, the oven will beep, “PREHEAT”
will turn off and “CNVT BAKE” will be displayed. “AUTO” will
be displayed if Auto Convect conversion feature is turned on.
5. Place food in the oven.
6. Press CANCEL when finished cooking.
Convect Roast
(on some models)
Convection Roast can be used to roast meat and poultry, and
vegetables.
To Convect Roast:
Before convection roasting, position racks according to the
“Positioning Racks and Bakeware” section. It is not necessary to
wait for the oven to preheat before putting food in, unless
recommended in the recipe. If a recipe suggest preheating the
oven, add 15 minutes to the cook time.
1. Place food in the oven.
2. Press CONVECT.
3. Use the right Quickset pad to scroll to CNVT ROAST.
4. Select CNVT ROAST using the left Quickset pad.
5. Select the oven temperature using the Quickset pads.
OR
Enter the desired temperature using the number pads.
The temperature can be set between 170°F and 550°F
(77°C and 288°C).
6. Press ENTER pad to set.
7. Select the cook time using the Quickset pads.
OR
Enter the desired cook time using the number pads.
NOTE: If Auto Convect is off, a roast time will not be required.
8. Press ENTER pad to set.
After 3 seconds, the oven will begin to heat. “CNVT ROAST”
will appear in the display along with “100°” or the actual oven
temperature, whichever is higher.
The temperature in the display will increase in 1° increments
until the oven reaches the preset temperature.
Cook time will begin to count down.
9. At 75% of the cooking time the oven will beep to let you know
to check food. Check food using a meat thermometer.
If food is done, take food out of oven and press CANCEL pad
to turn oven off.
If food is not done, continue roasting.
Once the set time has elapsed the oven will automatically go
into Keep Warm
TM
mode for 1 hour and then shut off. If food is
taken from the oven before the hour has elapsed, press the
CANCEL pad.
WARNING
Burn Hazard
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to follow these instructions can result in burns.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.