Jenn-Air JMV8208BA/BC Microwave Oven User Manual


 
10
Operating Instructions
CHILD LOCK
You may lock the control panel to
prevent the microwave from being
accidentally started or used by
children.
The Child Lock feature is also useful
when cleaning the control panel.
Child Lock prevents accidental
programming when wiping the control
panel.
Example: To set the child lock.
Touch and hold
ENTER/START
pad more than 3
seconds.
CHILD
LOCK ON will
appear in the display
window with two
beeps.
Example: To cancel the child
lock.
Touch and hold
ENTER/START
pad more than 3
seconds.
LOCKED
will disappear and
you hear two beeps.
LIGHT HI/LO/OFF
Touch LIGHT HI/LO/
OFF pad once for
bright light, twice for
night light, or three
times to turn the light
off.
ADD 30 SEC.
A time-saving pad, this simplified
control lets you quickly set and start
microwave cooking without the need
to touch the ENTER/ START pad.
Example: To set ADD 30 SEC. for
2 minutes.
Touch ADD 30 SEC.
pad 4 times. The
oven begins cooking
and display shows
time counting down
.
LIGHT TIMER
You can set the LIGHT to turn on and
off automatically at any time. The light
comes on at the same time every day
until reset.
Example: Turn on 2:00 AM, turn off
7:00 PM.
12 hour clock mode.
1. Touch LIGHT
TIMER pad.
2. Enter the time you
want the LIGHT to
turn on.
3. Touch ENTER/
START pad.
4. Touch 1 for AM.
5. Touch ENTER/
START pad.
6. Enter the time you
want the LIGHT to
turn off.
7. Touch ENTER/
START pad.
8. Touch 2 for PM.
9. Touch ENTER/
START pad.
24 hour clock mode.
1. Touch LIGHT
TIMER pad.
2. Enter the time you
want the LIGHT to
turn on.
3. Touch ENTER/
START pad.
4. Enter the time you
want the LIGHT to
turn off.
5. Touch ENTER/
START
pad.
Example: To cancel the LIGHT
TIMER.
1. Touch LIGHT
TIMER pad.
2. Touch 0 pad.
NOTE:
If you want to cancel the LIGHT
TIMER in operation, touch
the 0 pad.
CUSTOM PROGRAM
CUSTOM PROGRAM lets you recall
one cooking instruction previously
placed in memory and begin cooking
quickly.
Example: To cook for 2 minutes
at 70% power.
1. Touch CUSTOM
PROGRAM pad.
2. Enter the cook
time.
3. Touch POWER
LEVEL pad.
4. Enter the power
level.
5. Touch ENTER/
START pad.
Example: To recall the custom
program.
1. Touch CUSTOM
PROGRAM
pad.
2. Touch ENTER/
START
pad.
When the cook time is over, you
will hear four beeps and END will
display.
JMV8208BA_03143M.indb 10 2006-01-20 ¿ÀÀü 11:19:21