Filter
Top Products
Removing and Replacing the Automatic Ice Cube
Dispenser Bin
Lift the front of the Automatic Dispenser bin and pull it straight out. Wash the bin
occasionally in mild soap and lukewarm water. To replace the bin, push it at1the way
back until the bottom ofthe bin is behind the raised edge atthe front of the shelf itrests
upon. Make surethe tabs,atthe back ofthe bin,that turnthespiral augerarepositioned
between the prongs from the auger motor.
I Operating Your Automatic Ice and Water Dispenser {
Water/Ice Control
For dispensing ice cubes, the slide control must be
moved to the "Cube" position (center). For dispensing _._,,,..,_
crushed ice, move the controlto the "Crushed" position _/-
(left). c.................
For dispensing chilled water, the slide control must be : ( _ ii
I
moved completelyto the "Water" position (right). I
WaterfromthaO,sponser,soh,,ed,ce,dorwatar llil li
simp,addiceOefo adispensingthewa,ar.,so.the liL: l]first glass ofwaterdispensed eachtime may be warmer
than consecutive glasses. It will be cooler if a full glass
ofwater is dispensed rather than a partial glass. Fill a
container with icebeforeadding liquidto prevent splash-
ing.
Dispensing
To fill a glass, positionthe glass against the top portion
oftheactuatorpad andpress.Hold the glass high inthe
dispenser opening to reduce the ice falling outside _,
the glass.
Some crushed ice may be dispensed even thoughyou
selectedCUBE. This happens occasionally whena few
cubes accidentally get channeled in the crusher,
Whenchangingfromcrushediceto cubes somecrushed
icemay bedispensed. This ma
sized cubes or ice chips are in the storage bin.
Theremay be adelay whenyou switch fromcubestocrushed ice. Ittakes afew sect
for the cubes to be channeled in the crusher. Crushed ice pieces will vary in size
shape.
12