Filter
Top Products
Freezer Compartment
Features
To maintain the natural flavor, moisture, and nutrition of frozen foods, and to prevent
freezer burn, we recommend that all foods be wrapped or sealed properly.
I Freezer Shelves (Model JRS207) I
To remove a freezer shelf, lift the shelf straight up, tilt
sideways and pull straight out. When replacing a freezer
shelf, reverse the removal procedure.
I Adjustable Freezer Shelves (Most models) I
The freezer shelves can be adjusted up or down or __
removed to accommodate various sized packages. To :
remove a shelf, lift up on right side of shelf and push to the
right. Then, tilt shelf and remove.
To replace a freezer shelf: (1) tilt the shelf and insert right
rod ends into upper portion of oblong holes in the freezer
side wall; and (2) lower the left side of the shelf and insert in oblong holes in the left side
of the freezer wall. Make sure the shelf is secure before loading.
[ Bulk Storage Drawer (Models JRS207,JRSD2250, JRSD2450) ]
The slide-out Sulk Storage drawer can be removed by pulling it out
as far as it will go, then lifting the front edge and pulling straight out. I__ __/_/
If you notice that the drawer is not sliding smoothly or easily,
lubricate the slide rails with petroleum jelly. Apply lubrication to
points as shown. Also, make sure the bottom of the freezer is clean I/I S.UOE_,L_/II
where the slide rails make contact. _
I Bulk Storage Basket (Most Models) I F"Z'_)°_O_C'M"'
To remove the freezer basket; (1) pull the basket partially out; (2) reach to the back of the
basket and pivot the metal clips up to a horizontal position; and (3) pull the basket out,
When replacing the basket, reverse the removal procedure.