Filter
Top Products
10
Rack Accessories
Flip Tines
The racks consist of tines that can be folded down depending on what you
may need to load in the rack. To fold down, grasp the folding tine and release
from notch. Push folding tine downward to desired position as shown in
Figure 6.
Tall Item Sprinkler Head
If an item is too tall to be placed in the bottom rack even with the upper rack
in the raised position, remove the empty upper rack by pulling it out of the
dishwasher until it stops. Pull the front of the rack upward and outward until
the rollers are completely free of the roller guides. See Figure 9.
Set the upper rack aside. Push the roller guides back into the dishwasher. In-
sert the Extra Tall Item Sprinkler into the upper rack spray outlet and turn the
sprinkler clockwise to lock into position. See Figure 7.
Note: Keep the vent on the tub’s left side clear by placing tall items such as plas tic
cutting boards and tall baking sheets on the bottom rack’s right side or cen ter.
NOTICE
To avoid dishwasher damage, do not reinstall the upper rack without remov ing
the Extra Tall Item Sprinkler.
Light Item Clips (model dependent)
Light-weight plastic accessories (cups, lids, etc.) can be held securely by the
plastic item clips. See Figure 8.
Removing the Upper Rack
1 Pull the upper rack all the way.
2 Lift the rack at the front and pull it over the front catch (1) on the rails.
3 Lower the rack again and pull it out forwards.
Installing the Upper Rack
1 Pull the rails all the way out.
2 Install the rack by inserting the rails between the two metal
nubs (2) situated opposite each other on the left and right
sides of the rack.
3 Lift the rack over the front catch (1) on the rails.
4 The lower the basket and push it into the rear catch (3) on the
rails.
5 Snap the basket inot the front catch (1) and push in the basket all the way.
1
2
Figure 6
Figure 7
Figure 8
Figure 9
2 3
1