Filter
Top Products
IHow t o Install and Set t_,e Probe 1
BASIC _ '
to start coo g y.
To set probe feature
1. Insert the probe into the food item.
For meats,theprobetipshouldbelocated
in the center of the thickest part of the
moat and not in fat or touching a bone.
Place the food in the oven using the rack
position suggested on page 9.
Insert the probe plug into the receptacle located on the top left of the oven. Be
certain to insert plug into the receptacleall the way.
Note: Afterthe probe is inserted,the IndicatorWord PROBEwin flashand a beep
will sound remindingyou to enter the desired probe temperature.
2. Touch Probe Pad.
Indicator Word PROBE will flash and three dashes will be shown in the Display.
3. Touch the appropriate number pads to setthe temperaturefor desireddegreeof
doneness.
The temperature may be set in 5oincrements.(Allowable range is 100°to 200°.)
Example: At 10 o'clock to set the probe for 150%touch the Probe Pad and the
number pads"1,5,0". After five secondsthe Display willshow probe temperature
or 95°,whichever is higher. IndicatorWords CONV, BAKEand ROASTwill flash.
I0:00 I
22