Jenn-Air WM27460 Double Oven User Manual


 
Fifteenseconds later,the Displaywill returnto currenttime of dayandthe Indicator
Word TIMED win appear in the Display.
8.TouchStopTime Pad.
Indicator Words STOPTIME willflash. Displaywill show the calculated stop time
based on current time of day and cook time.
Note: Probeset temperaturewill controlthe actual baketime. Probetemperature,
not stop time, will turn oven off when food is done. Stoptime is programmedfor
the purposeof computing start time.
9. Touch the appropriate number pads to enter stop time.
A stoptime can onlybe acceptedfor later inthe day. Ifan unacceptablestop time
is entered, "Err" will flash briefly in the Display and then Display will return to
previous acceptable Stop Time.
Example: If at 10 o'clock you set the oven for a probe temperature, for 32
convection roastingand 2 hoursand 30 minutes cookingtime,the calculated stop
time would be "12:30". The Displaywould show:
If you want the stop time to be 1 o'clock, touch the number pads "1,0,0". After
five seconds,the Displaywill briefly displaythestart time. Thus,the Displaywould
show:
!g:3g
After five seconds, the Displaywill return to current time of day, thus showing:
I 0:00
When selectedtemperature hasbeen reached, theoven will shut off and a chime
will sound four times. Plus,the actual probe temperature will flash and the word
"End" will be in the Display. These words will remain in the Displayand a chime
will sound every minutefor ten minutes or until the Cancel Off Pad is touched. If
the probe is not removed, a beep will sound continuously until the probe is
removed.
IMPORTANT ]
To recall a selected temperature or time: Touch the appropriate function pad./
To change oven temperature set: Touch appropriate pad and touch the/
appropriate number padsto enter new desired temperature.
If morethan five secondselapse between touching a function pad and touching
a number pad, the on-go ng program returns to the Dsp ay.
24