Jenn-Air WW27430 Oven User Manual


 
DOOR LOCK SWITCH CODES
UNLOCKED DOOR CLOSED
DISPLAY CODES SWITCH LOCKED SWITCH SWITCH
7 CLOSED CLOSED CLOSED
6 OPEN CLOSED CLOSED
5 CLOSED OPEN CLOSED
i
!4 OPEN OPEN OPEN
3 CLOSED CLOSED OPEN
2 OPEN CLOSED OPEN
1 CLOSED OPEN OPEN
0 OPEN OPEN OPEN
For JJW Models
To test the control the following should be performed:
Bake Pad-
Touch the bake pad then touch the auto set pad within 4 seconds of
each other. The bake relay should engage and the element start to
heat. Listen for the relay and then check for heat from the element.
Broil Pad-
Touch the broil pad and then touch the auto set pad within 4 seconds
of each other. The broil relay should engage and the element start to
heat. Listen for the relay and then check for heat from the element.
Convect Bake Pad-
Touch the convect broil pad and then touch the auto set pad within
four seconds of each other. The convect bake relay should engage,
the fan should come run on low speed, end the element start to heat.
Listen for the relay, the fan, and then check for heat from the element. ,
Convect Roast Pad-Touch the convect roast pad and then touch the auto set pad within
four seconds of each other. The relay should engage, the fan should
start on high speed, and the element should start to heat. Listen for
the relay, the fan, and then check for heat from the element.
Drying Pad-
Touch the drying pad and then the auto set pad within four seconds
of each other. The fan should start and the element should start to
heat. Listen for the fan and check for heat from the element.
Clean Pad-
Touch the clean pad and then the auto set pad within four seconds of
each other. The relay should engage, the door lock motor energize,
and the door lock. Listen for the relay, the motor to energize, and
check the door to make sure it locks.
16009721 "[ROUBLESHOO'nNG 3-18
@1999 Maytag Appliances Sales Company