Jettech Metal Products FX-44 Dishwasher User Manual


 
CAP.1 INTRODUCTION
This manual provides important instructions about safe installation, use and maintenance of the dishwasher, so it is
crucial that you read it carefully.
Careful installation and accurate and constant maintenance will ensure you years of safe operation and perfect washing
results of your dishwasher.
Please consult the manufacturer for any need for service. Please keep in mind that non-compliance with the instructions
contained in this manual will cancel the warranty. We recommend you retain this manual for future reference.
We remind you that the warranty does not cover:
Damage caused by transport. If this should occur, the customer must report it to the dealer before the dishwasher in
question is installed.
Damage caused by incorrect installation. It is therefore compulsory that installation and testing be performed by
qualified and skilled personnel.
Damage caused by any use other than that for which the machine has been manufactured.
Damage caused by non-compliance with the provided instructions.
The installer must:
Check for perfect electrical connection and in particular good earthing, as well as the presence of a suitable earth-
leakage breaker and a circuit breaker.
Make sure that the wall-mounted circuit breaker is easily accessible and close to the machine.
Test the machine and make sure there is no malfunction.
Inform and train the personnel in charge of operating the machine about its use and the hazards it generates.
Agree with the user on a periodic check of the machine according to how much the machine is used
.
TERMINOLOGY
The terms “main switch”, “on-off valve” and “drain line” are used in this manual with the following meanings:
Main switch:
It must be a circuit breaker with thermal magnetic tripping mechanism able to completely cut off the power
supply from the dishwasher.
It must be installed outside the dishwasher but close to it.
It must supply one appliance only.
On-off valve:
Monodirectional on-off gate or ball valve able to quickly and completely turn off the water supply.
It must be installed outside the dishwasher but close to it.
It must supply one appliance only.
Drain line:
It must consist of one flux trap
It must have a suitable size for draining double the flow rate indicated in the table.
2