Filter
Top Products
In this fully integrated appliance the controls are located on the
top of the door.When selecting a programme, the door needs to
be open.
1. Check that the baskets have
been loaded correctly and that
the spray arms can rotate freely
2. Turn on the water tap
3. Press the On/Off button
The indicator lights of the programme selection buttons
illuminate.
4. Setting and starting the
programme
To select a programme, press the button of the
programme you wish to select, (see "Washing
programmes" chart), the indicator light of the selected
programme button remains illuminated while the other
programme indicator lights turn off. In the digital display
will appear, flashing, the running time of the programme
that has been set (in minutes).
Close the dishwasher’s door, the programme will start
automatically.
Setting and starting the programme with
the delay start
Once the washing programme has been selected press
the delay start button until the flashing number of
the hours for the delay start will appear in the digital
display (from 1h to 19h).
Close the dishwasher door, the countdown starts
automatically and will decrease with steps of 1 hour.
The opening of the door during the countdown will not
modify the delay start.
Once the delay start has elapsed the programme will
start automatically.
Note:
The start of the programme or the countdown
of the delay start will only commence after the closure
of the door.
Until that moment it is possible to modify the settings
made.
Note:
Once the washing programme has started, a
point-shaped optical signal appears on the floor beneath
the dishwasher’s door.This optical signal will remain
illuminated for all the duration of the washing
programme.
If the appliance has been installed higher up with a
furniture door mounted flush, the optical signal will be no
longer visible.
5. To interrupt or cancel a washing
programme in progress
Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention!
Hot steam may escape when the door is
opened.
Open the door carefully.
Interrupt a washing programme in
progress
Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the
point at which it was interrupted.
Cancel a washing programme in progress
Open the dishwasher door.
Press simultaneously function buttons 2 and 3 for about
2 seconds.After about 2 seconds all the programme
indicator lights will illuminate indicating that the running
programme has been cancelled.
If a new washing programme is to be selected, check that
there is detergent in the detergent dispenser.
6. To cancel a delay start
To cancel a delay start in progress you have to reset the
dishwasher; follow the same instructions given in “Cancel
a washing programme in progress”. Cancelling a delay
start involves also the cancelling of the washing
programme set.
In this case you have to set the washing programme
again.
Starting a Washing Programme
21