Filter
Top Products
21
occasionally leaves rough edges. If
necessary, remove stubborn stains
using a paste cleaner.
After cleaning, make sure that the pan
supports are correctly positioned.
To keep the pan supports in the correct
position, they are mounted on metal pins
located in the lateral sides of the hob. To
ensure a better cleaning, pan supports can be
removed from the hob. Lift up the pan
suports keeping them in horizontal position
as shown in figure 2.
Avoid lifting the pan supports atAvoid lifting the pan supports at
Avoid lifting the pan supports atAvoid lifting the pan supports at
Avoid lifting the pan supports at
an angle, as this will put strainan angle, as this will put strain
an angle, as this will put strainan angle, as this will put strain
an angle, as this will put strain
on the metal pins. This mayon the metal pins. This may
on the metal pins. This mayon the metal pins. This may
on the metal pins. This may
damage the pins and cause themdamage the pins and cause them
damage the pins and cause themdamage the pins and cause them
damage the pins and cause them
to break.to break.
to break.to break.
to break.
PaPa
PaPa
Pa
y attention when ry attention when r
y attention when ry attention when r
y attention when r
eplacing theeplacing the
eplacing theeplacing the
eplacing the
pan supports in order to avoidpan supports in order to avoid
pan supports in order to avoidpan supports in order to avoid
pan supports in order to avoid
in order to avoid scratching thein order to avoid scratching the
in order to avoid scratching thein order to avoid scratching the
in order to avoid scratching the
glass hob top.glass hob top.
glass hob top.glass hob top.
glass hob top.
The BurnersThe Burners
The BurnersThe Burners
The Burners
The burner caps and crowns can be removed
for cleaning.
Wash the burners caps and crowns using hot
soapy water, and remove marks with a mild
paste cleaner. A well moistened soap
impregnated steel wool pad can be used with
caution, if the marks are particularly difficult
to remove.
After cleaning, be sure to wipe dry with a soft
cloth.
The Ignition electrodeThe Ignition electrode
The Ignition electrodeThe Ignition electrode
The Ignition electrode
The electric ignition is obtained through a
ceramic electrode which contains a metal
electrode (Fig. 1 -
CC
CC
C). Keep these
components very clean, to avoid difficult
lighting, and check that the burner crown
holes (Fig. 1 -
BB
BB
B) are not obstructed.
NO
YES
Fig. 2Fig. 2
Fig. 2Fig. 2
Fig. 2