Filter
Top Products
33
Fig. 11
b) the decorated middle pane with a frame on the
4 sides must be reassembled so that the
screen-printing is facing outwards. The side of
the pane of glass is correct if you do not feel any
roughness near the screen printing when you
pass your fingers over the surface.
The middle pane of glass must be put back into
the right seats as shown in Fig. 11.
c) the uppermost pane must be reassembled as
shown in Fig. 12.
After the panes of glass have been reassembled
in the oven door, perform the procedure described
in point 8. in reverse to ensure they are locked.
Fig. 12