Filter
Top Products
34
Oven Shelves and Shelf Supports
The shelf support rails on the left and right hand
sides of the oven can be removed for cleaning the
side walls.
Removing the shelf support rails
First pull the front of the rail away from the oven
wall and then unhitch at the back (1, 2).
Fitting the shelf support rails
To install, first reattach the rails at the back, then put
them into position at the front and press them into
place (3).To clean the shelf support rails, soak in
warm soapy water and remove stubborn marks
with a well wetted soap impregnated pad. Rinse
well and dry with a soft cloth.
Remove the shelf supports and all
oven accessories before activating
the pyrolytic cleaning cycle.
Replacing the oven light
Disconnect the appliance
If the oven bulb needs replacing, it must comply
with the following specifications:
- Electric power: 40 W,
- Electric rate: 230 V (50 Hz),
- Resistant to temperatures of 300°C,
- Connection type: E14.
These bulbs are available from your local Service
Force Centre.
To replace the faulty bulb:
1. Ensure the oven is isolated from the electrical
supply.
2. Push in and turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the
new one.
4. Refit the glass cover and restore the electrical
supply.
)
1
2
3