Filter
Top Products
4.
Press function button (A), the indicators
above function buttons (B) and (C) go
off while the indicator above function
button (A) continues to flash. The
display shows the current level (e.g.
displayed = level 5 ).
5. To change the level, go on pressing
function button (A) until the display
shows the required level. Refer to the
water hardness table.
6. Switch off the appliance to confirm the
operation.
Filling with salt
Caution! Only use salt specifically
designed for dishwasher use. All
other types of salt, especially table
salt, will damage the water softener.
Only fill with salt just before starting
one of the complete washing
programmes. This will prevent any
grains of salt or salty water, which
may have been spilt, to remain on the
bottom of the appliance for any
period of time and cause corrosion.
1. Open the appliance door and remove
the lower basket.
2. Unscrew the cap of the salt container by
turning it anticlockwise.
3. Pour 1 litre of water into the container
(this is necessary only before filling with
salt for the first time).
4. Using the funnel provided, pour in the
salt until the container is full.
5. Screw on the cap of the salt container by
turning it clockwise until it stops with a
click. Make sure that there is no trace of
salt on the screw thread or on the
gasket.
Do not worry if water overflows
from the unit when filling with salt,
this is quite normal.
Filling with rinse aid
20
30
M
A
X
1
2
3
4
+
-
12