Filter
Top Products
To deactivate the Multi tab
function and use separately
detergent, salt and rinse aid
1. Press the Multi tab button, the Multi tab
indicator goes off. The function has been
deactivated.
2. Fill the salt container and the rinse aid
dispenser.
3. Adjust the water hardness to the highest
level.
4. Perform a washing programme without
loading any dishes.
5. When the washing programme is
completed, adjust the water softener to
the water hardness in your area.
6. Adjust the rinse aid dosage.
Select and start a washing
programme
Starting the washing
programme without
delay start
1. Open the appliance door.
2. Switch on the appliance. Make sure that
the appliance is in setting mode.
3. Select a washing programme. Refer to
'Washing programmes'.
• The related programme indicator
comes on while the other programme
indicators go off.
• The programme time flashes in the
display.
4. Close the appliance door. The washing
programme starts automatically.
• In the display the programme time is
no longer flashing but fixed with static
light,
You can select the washing
programme also with the door
closed. Once you set a washing
programme, you have only three
seconds to select a different
programme. After these three
seconds, the washing programme
starts automatically.
Starting the washing
programme with delay
start
1. Open the appliance door.
2. Switch on the appliance and select a
washing programme.
3. Press one of the delay start buttons until
the display shows the hours for the delay
start.
• The hours flash in the display.
4. Close the appliance door. The
countdown starts automatically.
• The hours are no longer flashing but
fixed with static light .
19