Filter
Top Products
4.
Take hold of the coarse filter (A) by the
handle with the hole and remove from the
microfilter (B).
5. Clean all filters thoroughly under running
water.
6. Remove the flat filter from the base of the
washing compartment and clean both
faces thoroughly.
7. Put the flat filter back in the base of the
washing compartment and ensure that it
fits perfectly.
8.
Place the coarse filter (A) in the
microfilter (B) and press together.
9. Put the filter combination in place and lock
by turning the handle clockwise to the
stop. During this process ensure that the
flat filter does not protrude above the
base of the washing compartment.
NEVER use the dishwasher
without filters.
Incorrect repositioning and fitting of
the filters will produce poor washing
results and will result in damage to the
appliance.
NEVER try to remove the spray
arms.
If residues of soil have clogged the
holes in the spray arms, remove the
debris with a cocktail stick.
External cleaning
Clean the external surfaces of the machine
and control panel with a damp soft cloth. If
necessary use only neutral detergents. Never
use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc...).
Internal cleaning
Ensure that the seals around the door, the
detergent and rinse aid dispensers are cleaned
regularly with a damp cloth.
We recommend every 3 months you run the
wash programme for heavy soiled dishes using
detergent but without dishes.
Prolonged periods of non-
operation
If you are not using the machine for a
prolonged period of time you are advised to:
1. Unplug the appliance and then turn off the
water.
2. Leave the door ajar to prevent the
formation of any unpleasant smells.
3. Leave the inside of the machine clean.
23