Filter
Top Products
Filling with dishwasher salt
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed for use
in a dishwasher, especially table salt, will damage the
water softener.
Only fill with salt just before starting one of the
complete washing programmes.
This will prevent any grains of salt or salty water,
which may have been spilt, remaining on the bottom
of the machine for any period of time, which may
cause corrosion.
To fill:
1. Open the door,remove the lower basket and unscrew the
cap of the salt container by turning it anticlockwise.
2. Pour 1 litre of water inside the container (this is
necessary only before filling with salt for the first
time).
3. Using the funnel
provided, pour in the salt
until the container is full.
4. Replace the cap making
sure that there is no
trace of salt on the screw
thread or on the gasket.
5. Replace on the cap tightly
turning it clockwise until
it stops with a click.
The salt container will require topping up periodically.You are
reminded of this by the salt indicator light on the control
panel which comes on when the salt has finished.
The salt indicator light on the control panel can
remain illuminated for 2-6 hours after the salt has
been replenished,assuming the dishwasher remains
switched on. If you are using salts that take longer to
dissolve then this can take longer.The function of the
machine is not affected.
Do not worry if water over flows from the unit when filling
with salt, this is quite normal.
8
SALE
ZOUT
SALT
SALZ
SEL
SR14