Filter
Top Products
8. Remove the stoppers (1) and move to
the other side of the doors.
1
9. Unscrew the upper hinge pivot (t1) and
screw it on the opposite side.
10. Remove the left-hand cover pin of the
middle hinge (m3,m4) and move to the
other side.
11. Fit the pin of the middle hinge (m5) into
the left-hand hole of the lower door.
12. Re-insert the lower door on the lower
hinge pivot (b2).
13. Fit the upper door on the upper hinge
pivot (t1).
14. Re-insert the upper door on the middle
hinge pivot (m5) slightly tilting both
doors.
15. Re-screw the middle hinge (m2). Do
not forget the plastic spacer (m1)
inserted under the middle hinge. Make
sure that the edges of the doors run
parallel to the side edge of the
appliance.
16. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the
reversibility of the doors at your cost.
Repairs - after sales service
Your appliance comes with a three year
warranty. If it is not working correctly refer
to "Something not working". If a fault occurs
which you can not resolve through following
the advice and information contained within
this instruction manual, the next step is to
contact our extended warranty
administrators on:
0844 871 7771
They will give you details for your local
service engineer. Before calling out an
engineer, please ensure you have read the
details under the heading “Something not
working”.
20