Filter
Top Products
t1
d7
t1
t1
t2
t3
2. Remove the little plastic cover from the
door plastic trim and refit on the opposite
side (t3).
3. Remove the panel (t4). If it is necessary
use a screwdriver very carefully. Unscrew
the screw on the other side. Remove the
upper door mount (t5) . Place them in an
empty plastic bag.
t5
t4
4. Remove the upper door.
5. Unscrew the screw and remove the door
stopper (d1). Attach it reversed on the
other side.
d1
6. Unscrew the middle hinge (m2). Remove
the plastic spacer (m1).
m1
m2
m3
m4
m5
m6
7. Remove the spacer (m6) and move to the
other side of the hinge pivot (m5).
8. Remove the lower door.
9. Remove using a tool the cover (b1).
Unscrew the lower hinge pivot (b2) and
the spacer (b3) and place them on the
opposite side.
10. Re-insert the cover (b1) on the opposite
side.
24