John Lewis JLFFW1811 Freezer User Manual


 
First switch on
After plugging the plug into the power outlet,
if the display is not illuminated, press key (A),
appliance on.
As soon as the appliance is turned on, it is in
alarm condition, the temperature flashes and
you will hear a buzzer.
Press key (E) and the buzzer will go off (also
see the section on "excessive temperature
alarm" ) the icon
still flashes and on the
indicator
will appear the warmest
temperature reached.
For a correct storage of the food select the
Eco mode function that guarantee the
following temperatures are set:
+5°C in the fridge
-18°C in the freezer
Wait until the inside compartment
temperature reach -18°C, before
introducing the goods in the freezer
compartment.
To select a different temperature see
"Temperature regulation".
Important! If the door remains ajar for some
minutes, the internal lighting will turn off
electronically; after this, the lighting function
will be reset by closing and opening the door
itself.
Switching off
The appliance is shut off by pressing button
(A) until a countdown from -3 -2 -1 is
completed.
Functions Menu
By activating the key (D) the functions menu
is operating. Each function could be confirmed
by pressing button (E). If there is no
confirmation after some seconds the display
will go out from the menu and return in
normal condition.
The following functions are indicated:
Select/Switch off/Switch on fridge
compartment
Select/Switch off/Switch on freezer
compartment
Ambient Temperature
Child Lock function
Shopping function
Eco Mode function
Action Freeze function
Drinks Chill function
Temperature regulation
The temperature may be regulated by
pressing the key (D) to select the
compartment and than the key (B) to set the
desired temperature.
By pressing the key (B) the current
temperature setting flashes on the indicator.
To confirm the choice of the temperature
press the key (E).
You will hear the buzzer for few seconds and
the indicator displays the newly selected
temperature for a few seconds, then shows
again the inside compartment temperature.
The newly selected-temperature must be
reached after 24 hours.
After a long period out of use it is not
necessary to set again the temperature
because it remains stored.
Important! During the stability period by the
first starting the temperature displayed can
not correspond to the setting temperature.
During this time it is possible that the
temperature displayed is different than the
setting temperature.
Holiday Function "H"
The holiday function sets the temperature at
+ 15°C.
8