Filter
Top Products
19
Door reversibility
Before carrying out any operations, remove the plug
from the power socket.
We suggest that this be done with another person who
will keep a firm hold on the doors of the appliance
during the operations.
Open the door with the appliance in the upright
position.Unscrew the screws and remove the upper
door plastic trim.
Remove the little plastic cover from the door plastic
trim and refit on the opposite side (d).
Lay the appliance onto its back side.
Remove the screw of the hinge cover plug (a).
Unscrew the upper hinge and remove it (b).
Unscrew the screw and remove the door stopper (c).
Remove the door.
Remove using a tool the cover (e) unscrew the
lower hinge pivot (f) and place it on the opposite
side.
Reinsert the cover (e) on the opposite side.
Reinsert the door .
Pay attention that the front board of the doors are
parallel to the front board of the top.
Fix the door stopper on the opposite side.
Position and fix the upper hinge (that can be found in the
instruction for use bag) on the opposite side .
Fix the screw of the new cover hinge (that can be found
in the instruction for use bag).
Lift up the appliance to vertical position.
Open the door and reposition the upper door plastic
trim with screws.
Fix the handle on the opposite side, insert the plastic
plugs into the holes left open that can be found in the
instruction for use bag.
a
b
c
Shelf holders
Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
Move the shelf holders in the direction of the arrow,
raise the shelf from the rear and push it forward
until it is freed and remove the retainers.
A
C
B