Filter
Top Products
16
Ⅲ Press the Rotary Switch (1)
Ⅲ RINSE
Ⅲ Turn the Rotary Switch (1) until the required program item ap-
pears on the display (9).
Ⅲ e.g. RINSE, CLEAN, FILTER, DE-SCALE or EXIT
Ⅲ e.g. CLEAN
Ⅲ Press the Rotary Switch (1)
Ⅲ The cleaning program starts.
Ⅲ EMPTY TRAY
Ⅲ Continue with Chapter 17 Cleaning, from point 3
EMPTY TRAY
15.4 Programming the aroma INTENSIVE
or STANDARD
When the machine leaves the factory, the aroma is set to
intensive. If requested it can also be set to Standard.
Ⅲ READY
Ⅲ Press the Rotary Switch (1) until
FILTER –/ߛ appears
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until Aroma is displayed.
Ⅲ AROMA
Ⅲ Press the Rotary Switch (1).
Ⅲ INTENSIVE
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
Ⅲ STANDARD
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ AROMA
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ READY
15.5 Programming the temperature
Ⅲ READY
Ⅲ Press the Rotary Switch (1) until
FILTER –/ߛ appears
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until Temperature is displayed.
Ⅲ TEMPERATURE
Ⅲ Press the Rotary Switch (1).
Ⅲ HIGH
Ⅲ Turn the Rotary Switch (1) to change the temperature from
HIGH to NORMAL (or vice versa).
Ⅲ NORMAL
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ TEMPERATURE
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ READY
15.6 Programming the time
You must programme the time if you want to use the auto-
matic switch-on function.
Ⅲ READY
Ⅲ Press the Rotary Switch (1) until
FILTER –/ߛ appears