Filter
Top Products
23
When using the de-scaling agent, immediately remove any
splashes or drips from sensitive surfaces, i.e. natural stone
and wooden surfaces, or take appropriate precautions.
In any case wait until the de-scaling agent is used up and the
tank is empty. Never refill de-scaling agent.
Ⅲ MACHINE CALCIFIED / MACHINE READY
Ⅲ Remove hot water nozzle/2-stage frothing jet.
Ⅲ Touch the symbol (7).
Ⅲ EMPTY
TRAY
Ⅲ Empty the tray (20).
Ⅲ NO
TRAY
Ⅲ Insert the tray (20) again.
Ⅲ AGENT
IN TANK
Completely dissolve the content of one blister (3 tablets) in a jug
containing 0.5 litres of water, and fill the mixture in the water tank.
Reinstall the water tank.
Ⅲ OPEN TAP
AGENT
IN TANK
Ⅲ Put a sufficiently large container under the replaceable hot water
nozzle (16).
Ⅲ Open the steam / hot water draw-off valve (14) (Fig. 12).
Ⅲ DE-SCALING
Ⅲ CLOSE TAP
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ DE-SCALING
Ⅲ EMPTY
TRAY
Ⅲ Empty the tray (20).
Ⅲ NO
TRAY
Ⅲ Insert the tray (20) again.
Ⅲ FILL
WATER
Rinse the water tank thoroughly and fill it with cold, fresh
tap water. Install it again.
Ⅲ OPEN
TAP
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ DE-SCALING
Ⅲ CLOSE TAP
Ⅲ After you have closed the steam / hot water draw off tap (14),
the following message is displayed
Ⅲ DE-SCALING
Ⅲ EMPTY
TRAY
Ⅲ Empty the tray (20).
Ⅲ NO
TRAY
Ⅲ Insert the tray (20) again.
Ⅲ PRESS
MAINT.
Ⅲ Touch the symbol (7).
Ⅲ RINSING
Ⅲ READY
Ⅲ The de-scaling operation was completed successfully.
E