Filter
Top Products
the three cup symbols are:
BIG CUP: ............... 240 ML (8 oz.)
COFFEE (cup): ....... 150 ML (5 oz.)
ESPRESSO (cup): .. 60 ML (2 oz.)
• Press the P-Button.
• Touch the right arrow until the display shows
WATER
QUANTITY
.
• Touch ST@RT. The display shows SELECT PRODUCT
and illuminates the three cup symbols.
Please note: touch all three cup symbols and the display will
show you the actual cup size. e.g. BIG CUP 240 ML or ESPRES-
SO 60 ML.
a. Touch the cup symbol for which you want to change the
size. e.g.
ESPRESSO 60 ML.
b. Touch ST@RT. The number 60 starts blinking.
c. Use the right arrow to increase, the left arrow to decrease
the size. Push the arrow repeatedly, until the desired cup
size is displayed: e.g.
ESPRESSO 45 ML (= 1
1
⁄2 oz.).
d. Touch ST@RT to confirm. The display shows WATER
QUANTITY. You can touch another cup symbol to change
that size (repeat steps a through d) or press the P Button to
return to
SELECT PRODUCT.
18d. PROGRAMMING THE 1-CUP BUTTON
You can change the cup size for the 1-Cup Button (Fig. 3c).
Choose from 30 to 240 ML (= 1 to 8 oz.).
Please note: The 2-Cup Button automatically delivers twice as
much coffee.
The factory setting for the 1-Cup Button is 120 ML (4 oz.), for
the 2-Cup Button 240 ML (8 oz.).
• Press the P-Button.
• Touch the arrow until the display shows
1 CUP 120 ML.
• Touch
ST@RT. The number 120 starts blinking.
• Touch the right or left arrow repeatedly until the desired
size is displayed.
• Touch ST@RT to confirm. The display lets you now select
the strength for the 1-CUP button.
• Touch the bean symbols to choose
MILD, NORMAL or
STRONG.
• Touch ST@RT to confirm.
• Press the P Button to return to
SELECT PRODUCT.
18e. PROGRAMMING STEAM PORTION
The steam portion can be programmed between 3 and 60 sec-
onds. The factory setting is STEAM 60 SEC.
• Press the P-Button.
• Touch the arrow until the display shows
STEAM 60 SEC.
• Touch ST@RT. The number 60 starts blinking.
• Touch either arrow repeatedly until the desired duration is
shown.
• Touch
ST@RT to confirm.
• Press P button to return to SELECT PRODUCT.
Please note: During steaming you can always stop the flow of
steam by simply pushing the Steam Button. This will not change
the setting. When the steam output stops you can immediately
resume steaming by pressing the steam button again.
18f. PROGRAMMING WATER PORTION
The Hot Water Button can be programmed to dispense any
amount up to approx. 16 oz. (480 ML). The factory setting is
5 oz. (150 ML).
19.