Filter
Top Products
– 20 –
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT CHAPTER
GO TO CHAPTER =
Current disc information
(See page 17.)
Disc playing
information
Off
(No indication)
While playing back a disc encoded with Dolby Digital, the
DOLBY DIGITAL lamp on the front panel lights up. If it has
multichannel signals—5.1ch, the Surround mode is
automatically activated.
While playing back an MPEG Multichannel disc, the
Surround mode is automatically activated.
• Using the on-screen menus, you can adjust the speaker
settings for 5.1ch Surround mode depending on your room
situation. (See page 40.)
• While playing back a multichannel disc, the front left and
the front right signals are output when—
—hearing a disc through headphones.
—hearing a disc through AUX OUT jacks.
—recording onto tapes.
• You can also confirm the current channel setting by pressing
DISPLAY on the unit. (See page 51.)
To stop playing, press 7.
• This unit can memorize the stop point of DVD, and when
you start playback again by pressing DVD 3¥8 (or
DVD 3 on the remote control), playback starts from the
beginning of a chapter previously stopped—Resume play.
To use Resume play, you need to turn on the Resume
function. (See page 42.)
• To stop completely, press 7 twice.
To remove the disc, press 0 for the corresponding disc tray.
To go to another chapter
Turn 4 / ¢ during playback (or
press 4 or ¢ on the remote
control).
• 4: Goes back to the beginning of
the current or previous chapters.
• ¢: Skips to the beginning of the
next or succeeding chapters.
To go to a particular title or chapter directly using the
number buttons on the remote control
• Pressing the number buttons before playback allows you to
start playing from the title number you want.
• Pressing the number buttons during playback allows you to
start playing from the chapter number of the currently
playing title you want.
Ex.: To select number 5, press 5.
To select number 10, press 10.
To select number 20, press +10 then 10.
To select number 23, press +10, +10 then 3.
Current title
number
Current Chapter
number
Elapsed title
playing time
Title numbers of the currently playing disc.
(Numbers exceeding 16 are not displayed.)
To use Time Search and Chapter Search on the TV
screen
• You cannot use this function while using Random play.
On the remote control ONLY:
1
Press PLAY MODE during play.
The play mode screen appears.
2
Press CONTROL + or − to move
to “TIME SEARCH” or “CHAP.
SEARCH,” then press ENTER.
“GO TO _: _ _:_ _ ” for Time Search
or “GO TO CHAPTER = ” for
Chapter Search appears on the TV
screen.
3
Enter desired playing time or
chapter number by pressing the
number buttons.
• You can only use Time Search
within a currently playing title.
Ex.: To enter the time of “0:23:45,”
press 0, 2, 3, 4 and 5. (Always
enter all 5 digits.)
To enter chapter number 23, press 2 and 3.
To enter chapter number 3, press 3.
To cancel misentry for Time Search, press CONTROL −.
Each time you press the button the last number you
entered is erased. (You cannot erase a chapter number.)
4
Press ENTER.
The unit starts playback of the selected
point.
To erase the on-screen indication, press PLAY MODE
again.
To show the on-screen indication
You can show the following information on the TV screen
while playing back a disc.
To show the on-screen indication, press
DISPLAY while playing a disc.
• Each time you press the button, the indication
on the TV screen changes as follows:
Ex.: When “CHAP. SEARCH” is selected.
Continued
EN19-23.CA-MXDVB10,B9,A9_f 02.4.24, 9:43 AM20