Filter
Top Products
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity. Print only what is inside the frame.
6 USK MCL 36711 - 110622
Assembly page 6/16
Fax +32 2 359 95 50
SERVICING
See a professional appliance technician if this item does not function
properly, or contact the Kalorik Customer Service for help. Never
remove the back panel, nor operate the item immersed in any type
of liquid.
MAKING YOUR DRINK DISPENSER WORK
1. Open the front door of the unit and place up to 12 cans inside.
2. Plug the cord of the adapter at the back of the appliance and
then put the electric plug into the wall.
3. Turn power switch to “On” or “Cool”
4. Allow time for the drink to cool. This dispenser will cool drinks
based on the ambient temperature of the room (approximately
30F / 15C less than ambient temperature)
5. There are 6 loading zones, each containing 2 cans of 12 Oz.
6. Press the one of the 6 buttons where you see at least one can
available and quickly release it. The can will dispense out. Lift the
bottom door and a cold soda can will be there waiting for you to
enjoy.
Note: when using the press buttons in the upper position, please take
care to open your can cautiously as the gas in the drinks might be
disturbed by the higher fall and the can might spurt some liquids out,
if opened suddenly. Alternatively, please wait some time before
opening the cans that have been released from the 2 upper storage
cavities.
Press Button
Retrieve Can