Kalorik WM 36377 Waffle Iron User Manual


 
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame.
5 WM 36377 - 120501
Assembly page 5/26
Fax +1 305 430 9692
Set the thermostat to the desired position from “MIN” to “MAX”
(MAX being the hottest). When the green pilot light goes on, it
means that the desired temperature is reached. During use, this
pilot light will come on and off regularly. This simply means that the
thermostat is regulating the appliance's temperature.
Caution: during operation, the baking plates heat up. Pay
attention not to get burned.
Open the appliance and lightly brush the plates with butter,
margarine or cooking oil.
Pour the batter evenly onto the middle of the bottom baking
plate but not all the way to the edges (batter will expand while
heating and would overflow). Press the lid down in order to
spread the dough evenly on the baking plates. Do not overfill as
dough might come out of the appliance.
During the baking process, use the handle to turn the appliance
upside down from time to time, in order to spread the batter
evenly, and to bake and brown both sides of the waffles evenly
(rotate the plates but turning a half turn, clockwise, then after a
few minutes, counterclockwise, to spread the batter).
Note: It is not possible to open the appliance in the upside-down
position.
Bake until golden brown. If necessary, adjust the temperature by
turning the thermostat according to the desired browning level
needed to bake, and wait until the green pilot light goes out.
When the waffles are ready, remove them with a plastic or
wooden spatula. Never use any sharp metallic objects, as this
might damage the non-stick coating.
When baking is finished, set thermostat to “off”, unplug the cord
from the socket and leave the appliance open to cool.