Kambrook KCT110 Hot Beverage Maker User Manual


 
9
NOTE: The Kambrook Electric
Teapot must only be used with
the power base supplied. Use
caution when pouring water
from your Kambrook Electric
Teapot, as boiling water will
scald. Do not pour the water
too quickly.
WARNING: This
appliance is designed
for boiling of drinking
quality water only.
Never use it to heat or
boil any other liquids
or foodstuffs.
WARNING: The lid
should always be firmly
in place in the closed
position before use. Do
not open the lid during
and after operation.
This may result in boiling
water splashing from
the kettle.
Pour out all the hot
water from the kettle
before opening the lid
to refill.
Safety Boil Dry Protection
This Kambrook Electric Teapot is
fitted with a safety device, which
protects against overheating, should
your appliance be operated with
insufficient water. If this occurs the
Kambrook Electric Teapot will stop
heating and the switch will move to
the ‘OFF’ position and the illuminated
light will go out.
Should this occur, switch off at the
power outlet and unplug. Allow the
Kambrook Electric Teapot to cool
down before refilling. Remove the
teapot from the power base and add
cold water. Return the Teapot to the
power base. The safety device will
automatically reset.
WARNING: Do not
place the Kambrook
Electric Teapot on
a hot gas burner,
electric element or
heating plate.
KCT110_IB_FA.indd 9 6/11/09 1:26 PM