Filter
Top Products
8
Using Your Dome Kettle continued
NOTE:
Do not remove the kettle
from the power base during
operation. Ensure the kettle has
switched to the ‘OFF’ position
after the water has boiled before
removing the kettle from the
power base.
The kettle may be stored on the multi-
directional power base when not in
use. The power should be switched
off at the power outlet and then
unplugged when not in use.
CAUTION: This
appliance is designed
for the boiling of
drinking quality water
only; never use it to heat
or boil any other liquids
or foodstuffs. The lid
should always be firmly
in place and locked
closed before use.
CAUTION: Do not
remove the lid while
the water is boiling.
Ensure the lid is closed
whilst boiling.
Boil Dry Protection
This kettle is fitted with a safety device,
which protects against overheating
should your appliance be operated
with insufficient water. If this occurs
the kettle will stop heating and
automatically switch “OFF”.
Should this occur, switch off at the
power outlet and unplug. Allow the
kettle to cool down before refilling.
Remove the kettle from the power
base and add water. Return the kettle
to the power base. The safety device
will automatically reset.
For additional safety your kettle is
fitted with an additional thermal cut-
out. In the event of overheating, the
kettle will automatically shut down
to prevent further damage. Should
this occur, take your kettle to an
authorised Kambrook Service Centre.