Filter
Top Products
• Position the vehicle body on its side.
• Using a Phillips screwdriver to steady the screw and
pliers to grip the lock nut, continue to tighten the bolt and
lock nut on each footrest.
• Position the vehicle body upright.
11
16
17
Assembly
• Align the holes in a footrest with the holes in one end of
the footrest support.
• Insert a #10 x 1
1
/
4
" bolt through the footrest and
footrest support.
• Fit a lock nut onto the end of the bolt and hand-tighten it.
Holes
Hole
Footrest
Footrest
Support
Grooves
Square Opening
Footrest Support
Footrest
• Insert the footrest support through the square opening at
the bottom of the vehicle body. Make sure the grooves
on the footrest face up.
• Align the holes in the other footrest with the holes on the
other side of the footrest support and repeat assembly
step 16 on the other side of the footrest support.
15
• Position the vehicle body upright.
• Fit the bottom tabs on the grille into the slots in the front
of the vehicle body .
• Press firmly to snap the bottom tabs into the slots.
• Press firmly near the top of the grille to snap the top tabs
into the slots .
2
1
Grille
Bottom
Tabs
Top Tabs
Slots
1
2
18