Filter
Top Products
Assembling The Motor Bracket
Attach the Motor Bracket on the outside of the left grill bowl panel. Align the two holes of the
Bracket with the holes on the grill bowl. Tighten securely using two #10-24 x 3/4" UNC screws,
washers and nuts provided.
Motor
#10-24x3/4"
UNC Screws
with washers
and nuts
%
Assembling The Rotisserie
Slide a Food Skewer onto each end of the Rotisserie Spit. Adjust spacing between Skewers
to accommodate your food, then tighten the Thumbscrews to keep the Food Skewers in
position. Slide the Collar and Bushing onto the threaded end of the Spit. Do not tighten
the Collar Thumbscrew until the Rotisserie is placed into your grill. Screw the Handle
onto the threaded end of Rotisserie Spit as shown.
Food Skewers
Spit
Thumbscrew
Thumbscrew #10Xl/2"
1/4"xl/2"
Bushing
Thumbscrew
1/4"xl/2"
Collar
Handle
<