Kenmore 25344133800 Freezer User Manual


 
TO ADJUSTTHE SHELVES
,, Lift front edge up.
,, Pull shelf out
,, Replace the shelf by inserting the hooks at rear of the shelf into
the wall bracket. Lower the shelf into the desired slots and lock
into position.
CRISPERSWITH ADJUSTABLE DiViDERS
The crispers, located at the bottom of the freezer shelf, provide
separate storage space for items that are difficult to store on
freezer slelves.
MiD LEVEL LiGHTiNG
The mid level lighting is located at the back of the crispers. The
lights come on automatically when the door is opened. To replace
the light bulb, turn the temperature control to OFF and unplug the
electrical cord. Remove the lens from the lamp housing by
unsnapping it from the lamp housing using your fingers or a
screwdriver. Be careful not to break the locking tabs on the lamp
housing. Replace the old bulb with a bulb of the same type and
wattage. To replace the lens, snap one side of the lens opening
to the tab on the lamp housing. Then carefully attach the other
side.
To Remove Light Lens _
Press Tabs _ _ _.._
in Direction Showm. /. /
Mid Level Lighting
/ \o
AiR FILTER
The air filter is located on the back of the control box. In general,
you should change the air filter every six months to ensure optimal
filtering of freezer odors. You may want to adjust this time period
depending on the types and amounts of food you typically store
in your freezer.
TO REPLACETHE AiR FILTER:
,, Push the plastic bubble tab at the back ot the control box
housing. This releases the hinged bottom half to drop open.
,, Remove the old filter
and discard it. PushTab
to Roloase
,, Unpackage the new FIIterCover.
filter and place it inside
the hinged bottom half
of the housing. _t_
,, Push the hinged bottom
half upward until the tab
snaps into closed
position.
/
/
Air Flbr
DOOR MOUNTEDTEMPERATURE GAUGE
The door mounted temperature gauge displays the cabinet
internal temperature.