Filter
Top Products
REQUIRES; Phillips #2 Screwdriver.
1. Unplug the unitfrom the electrical outlet (if 6.
connected)and lay it on its beck,
2. Remov_thescrewsfromthetower Hinge
Assembly, 7.
3, Pullthe doordownward to remove it from the
cabinetofthe Wine Cooler,
8.
4.
5_
Removethe upper hinge pin from the top
rightside ofthe cabinetandreinstall It on the
top left side°
Remove the plasticcap from the right side of
the door frame and reinstallit on the left side
of the doorframe (the previouspin location),
Carefullyrepositlonthe door on the cabinet
and push up until the tophinge pinis
insertedinto the top of the doon
While the doorremainsclosed Install the
lower hinge assembly.
Closetha doorand returnthe unitto its
uptightposition(walt 60 minutes before re-
connecting power to the Wine Cooler),
verifythe dooralignmentand properseal
againstthe cabinet.
Upper Hinge Pin
i '°* I
,. S
Lower*hi'n_gA.;_mbly
and Door Support Bracket
Ensure all screws and fittings are tightlyfastened
and that the door issquarely aligned with the cab-
inet before using. Adjust ifnacessary,
6