Kenmore 461.99609 Refrigerator User Manual


 
Setting The Temperature Control;
The temperatureof theWine Cooler Iscontrolled
by adJusUng/settthgthe thermoslatcontrolknob,
located on Lheexterior rear wail of the cabinet.
To start the Wtne Coo!er and achieve maximum
cootlng quickly;
Turn the temperature control knob clockwise
to the furthest 'Max' (maximum) setting on
the wider blue section of the graduated
control dial.
Allow the unit to run at thissetting for 3-4
hours.
When maximum coolingisachieved, turn
back the temperaturecontrol knob setting to
the 10o'clock posltfon on thegraduated blue
controldial See fig.B.
Toturnoff the Wine Cooler,(nocooithg)
rotate the controlknob tothe "O"(off)
position Sea rigA
C
Irk
Fig. A
Fig.B
Walt 3 to 5 minutes before restarting If opera-
tion has been Interrupted
Turn the controlto the "O" (off) positionto tem-
porarilydisconnectthe coolingcycle. When the
Wine Cooler tsnot to be used for a long pedod of
time,disconnect the plug and leave the door par-
tiallyopen
Defrosting:
Your Wine Cooler Is designed withan "Auto-
Cycle" defrost system. What Is Auto Cycle
defrost?
The refrigerated surfaces defrost automatically
during the"off" cycle of the cold conltol. (thermo-
stat) Defrost water tsdisposed of automatically,
by means of being channeled onto a drip tray
located on the compressor. Heat transfer from
the compressor causes the defrost water to
evaporate.
tf you move, remove or
securely fasten down all
loose Items inside the Wine
Cooler, To avoid damaglng
the leveling screws, turn
them aII the way Into the
base
Vacation Time
For short vacation periods,
leave the controI knobs at
their usual settings During
longer absences;
1, Remove alt bottles,
2. Disconnect from
electrical outlet.
3_ Clean the Wine
Cooler thoroughly.
4, Leave the door open
to avotd formallons of
condensate, mold or
odors.
7