Filter
Top Products
Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
OVENiNTERIOR BAKE PAD
LIGHT PADUsed Used to
toturn oven selectthe
interiorlight ON bake
and OFF. _ function.
\
WARM& \
HOLD PAD \
Usedto set
theWarm& t V)
Hold _'_.CJ"
feature.
SELECT SEkF_
CLEAN PAD
Usedto select
the Self-Cleaning
cycle. A 2, 3 or 4
hour Self-Clean
time may be
selected.
BROIL PAD COOK TIME UP and DOWN ARROWS PADS Used Oven Cook Time Pad
Used to PAD Used to along with the function pads to select oven Light (some models)
select the
variable broil of the baking
function, time.
enter the length temperature, cook time, start time (when Pad
programming an automatic start time), time/
of day, clean time and minute timer.
DELAY START PAD Used to
set the desired start time for
baking or cleaning. May be
used with COOK TIME to
program a delayed bake cycle.
CLOCK
SETPAD
Usedto set
thetime of
day.
Bake Broil
Pad
STOP CLEAR PAD Used to clear any function previously
entered except the time of day and minute timer. Press
STOP CLEAR to stop cooking. Also the STOP CLEAR
pad is used to activate oven lockout setting.
®
Warm &
Hold Pad
(some
models)
Select Clean'Pad
(some models)
ADD 1 MINUTE PAD Used to add 1
minute to the Timer Countdown. This
feature works with the Kitchen Timer only
and does not affect any cook time or start
time functions (some models).
0 i1
Stop
Clear
Pad
Delay Start
Pad (some
models)
TIMER SET/OFF PAD Used to set or cancel the minute timer. The minute
timer does not start or stop cooking. Also, TIMER SET/OFF Pad is used to
set the Continuous Bake Feature.
For a silent control panel:
The Ds_"_pad controls the Silent Control Panel feature. The Silent Control Panel feature allows the oven control to be
operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and
later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control operation
1. Press and hold _ pad for 6 seconds. A beep will sound, "....--.== will appear, "UPPER" and "DELAY" will flash in the
display. After 6 seconds, a beep will sound and "SP" (speaker) will appear in the display.
2. Press/_ or v pad to switch between normal sound operation and silent operation mode. If "SP" appears, the control
will operate with normal sounds and beeps. If %="appears, the control is in the silent operation mode.
3. Wait 5 seconds to accept the change or press _ pad to reject the
change.
Temperature Conversion (Fahrenheit / Celsius)
The _I pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens
will be changed at the same time.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
,
,
3.
Press ) pad and hold for 6 seconds. A beep will sound, "==="will appear "UPPER" and "BROIL" will flash in the display.
After 6 seconds a beep will be heard and "F" or "C" will appear in the display. If "F" appears, the display is set to show
temperatures in Fahrenheit. If "C" appears, the display is set to show temperatures in Celsius.
Press A or v pad to switch between Fahrenheit or Celsius display modes. The display will show either "F" or "C".
accept the change or press _ pad to reject the change.
Wait 5 seconds to