Kenmore 587.14209 Dishwasher User Manual


 
Operating Instructions
Vent _
OP_SN_
Getting Started
1. Load dishwasher (See Preparing
and Loading Dishes).
7, Run hot water faucet nearest
dishwasher until water is hot.
Turn water off.
2. Add detergent (See Dishwasher
Dispenser & Detergents).
8. To start, close door to latch.
,
Add rinse aid, if needed (See
Rinse Aid).
Wash Delay
Allows you to delay starting the POTS PANS cycle.
Turn dial to select number of hours.
Select HEATED WASH ON option and other desired
options.
Close door to latch.
4,
5,
,
Turn dial clockwise to select cycle
(See Cycle Chart) or number of
hours for wash delay.
Select desired OPTIONS (See
Option Selections). The indicator
will show red when selected.
If using WASH DELAY, go to step
number 8.
Plate Warmer
For warming dishes and serving plates before serving
hot foods:
Load clean plates and dishes to be warmed.
Turn dial to PLATE WARMER.
Select HEATED DRY ON option.
Status Indicator Lights
The ON indicator light will come on when the dial is
turned to WASH DELAY or to the selected cycle. The
light will stay on until the end of the cycle.
The WATER HEATING light indicates the cycle is being
extended to heat the water to the proper temperature in
the main wash and/or final rinse, based on options
selected.