Filter
Top Products
Operating Instructions (continued)
Air Dry
LOCKON
The AIR DRY option saves electricity since
the heating element is off during drying
portion of cycle.
When selected, the light above the pad will come on
and remain on until end of cycle. To speed the drying
process, open the door slightly after the cycle is
complete. Some water droplets may remain on door
and tub and in areas where dishes touch silverware
basket and rack.
To select heated dry, press the pad a second time. The
light above the pad will turn off. Heated dry provides
faster drying since the heating element is on during the
drying portion of the cycle.
You may see water vapor coming from the vent during
the drying portion of cycle. The vent is closed during
washing to hold moisture and sound inside and then
opens for drying. The drying option may be changed at
any time during the cycle and affects only the drying
period.
Opening the door longer than one minute during the dry
cycle cancels the selected dry program.
Lock On
LOCKON
Lock the controls to prevent children from
accidently changing the cycle or starting the
dishwasher.
To lock the controls, press and release the AIR DRY
pad, then press and hold the AIR DRY pad for 5
seconds. The LOCK ON light will come on and no new
selections can be made until the lock is released. To
unlock the controls, press the AIR DRY pad for 5
seconds until the LOCK ON light goes out.
Delay Hours
Hou,s The DELAY HOURS option allows you to
2 4 6
o o _ delay starting your dishwasher up to 6 hours.
Press the DELAY HOURS pad once for a 2-hour delay,
twice for 4 hours and three times for 6 hours. A light will
come on indicating the delay start hours and will remain
on until cycle starts.
To cancel the DELAY HOURS option and begin the
cycle before the delay period is over, press the START/
CANCEL pad.
To Cancel a Cycle
You can cancel a cycle anytime during the
cycle. Press START/CANCEL pad and the
dishwasher will start a 90 second drain. At
the end of the drain, select the desired cycle.
Status Indicator Lights
WASHmNG
SENSING
9B, DRYING
_ANITIZED
CLEAN
The WASHING light comes on at the beginning of cycle
and remains on until the end of the final rinse.
The SENSING light comes on at the beginning of the
selected cycle and will remain on until the end of the
sensing sequence.
The DRYING light indicates the drying portion of the
cycle. The light will come on when either drying option
is selected.
When the SANITIZE option is selected, the SANITIZED
light will glow when the SANITIZE cycle is finished. If
the dishwasher did not properly sanitize the dishes, the
light will not come on. This can happen if the cycle is
interrupted. The light will remain on until the door is
opened.
The CLEAN light will come on at end of cycle and
remain on until door is opened.
10