Filter
Top Products
SECTION1 WATER FILTER START UP
C. PROGRAM THE TIMER
2. SET DAYS TO RECHARGE 3. SET RECHARGE TIME
This setting is the number of days the filter will go
between recharges. The default setting is 2 days,
with a maximum setting of 99.
The filter is factory set to begin recharge at 12:00
AM. If a different recharge time is desired, or
needed, do the following.
i-.0 t !3
RECHAJ_GE
k
a. Press the UP or DOWN buttons until the cor-
rect number of days between recharges is
shown in the display.
b. Press the SELECT button once to set the days
to recharge and advance to the next set up
screen.
See the chart below to determine the frequency of
recharges. Find the number of people living in the
household, and then going across the chart, find
the number of days that the filter should be set for
recharges.
al
b=
JE -:nnuu"J
RECflARGE
TIME
Press the UP or DOWN buttons until the cor-
rect recharge time is shown in the display.
Press the SELECT keypad once to set the re-
charge time and return the display to the nor-
mal operating screen with the present time of
day shown.
Regeneration Table
Number of People in Days to Recharge
Household setting
1 - 3 3 days
4 - 6 2 days
7- 10 1 days
1-4
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line