Kenmore 790.3106 Range User Manual


 
Care & Cleaning
Removing and Replacing the Drawer
To Remove the Drawer:
1. Open the drawer to the fully opened position.
2. Locate glide lever on each side of drawer_ pull up on the
left glide lever and push down on the right glide lever (See
Figure 1).
3. Pull the drawer away from the range.
To Replace the Drawer:
1. Pull the plastic slider to the front of the glide slots on
each side of the drawer cavity (See Figure 2).
2. Align the glide on each side of the drawer with the
drawer cavity glide slot.
3. Push the drawer into the drawer cavity until glide levers
"click" (approximately 2"). If you do not hear the glide
levers _cllck" or the drawer does not feel seated
remove the drawer and repeat steps | thru 3.
Left Glide Pull up lever
finger
Replacing the Halogen Oven Light
The oven lights wiii automatically turn ON when the oven
door is opened. The oven lights may also be manually
operated by pressing the _ pad.
The oven light bulb is covered with a glass shield. The
glass shield can be removed to be cleaned manually or to
change oven light. THIS GLASS SHIELD MUST BE IN PLACE
WHENEVER THE OVEN IS IN USE.
To replace the llght bulb:
BE SURE THE OVEN IS COOL.
1. Turn the power off: at the main source.
2. Wear a leather-faced glove for protection against
possible broken glass.
3. To remove the glass shield0 lift up on side and use force
to pull shield out.
4. Replace halogen light appliance bulb taking care not
to touch the bulb with your bare fingers. Touching bulb
with your skin can leave a film on the bulb that causes
it to burn out quickly.
5. Replace glass shield in opposite order and manner of
removal.
Push down
lever with
finger
Glide
Lift up and pull out.
Figure 2
35