Filter
Top Products
Control Pad Functions
READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below,
CLOCK SET COOK TIME UP and DOWN ARROW PADS-- Used BAKE PAD--Used FEATURE iNDiCATOR
PAD-- Used PAD-- Used to along with the function pads to select oven to select the bake LIGHTS-- These light to
to set the enter the length of temperature, cook time, start time (when function, show which feature is in
time of day. the baking time. programming an automatic start time), time of J use.
\ day, clean time and minute timer. I / BROIL PAD--
_ _ I _ Used to select
OVENiNTERiOR _ \ \ I / thevariablebroil
LIGHT PAD-- _ k \ I / function.
Usedtoturnoven \ \ I / /
interiorlightONor _ _" \" _k I" " /
OFF. _ _ _ _ , _ _ f I _ WARM & HOLD
_._ Time _ _ [ poke I Bro _ PAD-- Used to set
the Warm & Hold
• • • • OVEN
feature.
SELECT CLEAN _ (__
PAD-- Used to -- Select Timer Delay Q PREHEAT
select the Self- Clean I I STOP PAD-- Used
Set/Off Start • DOOR LOCKED to clear any function
o / o....
2, 3 or 4 hour Self- LOCKOUT except the time of
Clean time may be day and minute timer.
selected.
TIMER SET/OFF PAD--
Used to set or cancel the
minute timer. The minute
timer does not start or stop
cooking. Also,
TIMER SET/OFF pad is
used to set the Continuous
Bake featu re.
DE LAY START
PAD-- Used to set
the desired start
time for baking &
Self-Clean. May be
used with COOK
TIME to program a
delayed bake cycle.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN"
light will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash when
the oven door locks and unlocks or when using the Self-Clean cycle
or when the oven lockout is activated. The indicator light will glow
constantly after the door locks.
Press STOP to stop
cooking. Also the
STOP pad is used
to activate oven door
lockout setting.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the pre-
heat indicator light turns OFF, your oven has reached the set temperature.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold After 5 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return to normal sound operation, press and hold again for 5 seconds until the
control beeps once.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press _roil. "----" appears in the display.
2. Press and hold the A until "HI" appears in the display.
3. Press and hold _roil until °F or °C appears in the display.
4. Press the A or V to change °Fto °C or °C to °R
5. Press any control pad to return to normal operating mode.
12