Filter
Top Products
Before You Calt
° Solutions to Common Problems (cont'd)
OCCURRENCE POSSmBLE CAUSE/SOLUTmON
Cooktop Zone ControJ displays E induction Cooktop main control has detected a fault or error condition, Try turning
and 2 digit LED Main Control electrical power supply OFF and back ON to cooktop in order to reset Cooktop
displays 00, 0:7, 0_, 05, 05 or 07 main controls, If fault recurs, record fault numberand turn power supply to
Cooktop OFF, Call 1-800-4-MY-HOME® for assistance (See back cover),
Cooking Zone LED continuousJy
flashes F
induction Cooktop pan detection sensors do not see the correct cookware, Test
with a magnet to be sure cookware is made with induction compatible material,
Cookware has been removed from the Cooking Zone without turning the Cooking
Zone OFF, Place cookware back on to the Cooking Zone or if finished cooking
turn of the affected Cooking Zone,
Cookware is not centered over the Cooking Zone properly, Refer to Fig, 20 for
correct cookware placement,
Metal marks on ceramic cooktop
surface
Sliding or scraping of metal utensils on cooktop surface, DO NOT slide cookware
or cooking utensils across the cooktop surface, Use the recommended ceramic
glass cooktop cleaning creme to remove the marks, See "Cooktop Cleaning &
Maintenance" in the GeneraJ Care & CJeaning section (Refer to p, 13),
Scratches or abrasions on ceramic
cooktop surface
Coarse particles such as salt or sand between cooktop and cookware or cooking
utensils can cause scratches, Be sure cooktop surface and bottoms of utensils
are clean before placing on cooktop, Small scratches do not affect cooking and
will become less visible with time,
Cleaning materials not recommended for ceramic-glass cooktop have been used,
See "Cooktop Cleaning & Maintenance" in the GeneraJ Care & Cleaning
section,
Cookware with rough bottoms were used, Use smooth, fiat-bottomed cookware
ONLY (See Figs, 20 & 21 ),
Brown streaks or specks on ceramic Boil overs are cooked onto cooktop surface, Use a razor blade scraper to remove
cooktopsurface soil, See "Cooktop Cleaning & Maintenance" in the GeneraJ Care & Cleaning
section (Refer to p, 13),
Areas of discoJoration with metallic
sheen on ceramic cooktop surface
Mineral deposits from food and/or water, Remove using a ceramic-glass cooktop
cleaning creme, Remember to use cookware with clean, dry bottoms, For more
information See "Cooktop Cleaning and Maintenance" in the GeneraJ Care &
Cteaning section,
'!!...............
15