Filter
Top Products
Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and
Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
OVEN
INTERIOR
LIGHT PAD
Used to turn of day. of the baking (when programming an automatic start
interior light --_ time. \ time), time of day, clean time and
oven
ON and OFF._ _ X minute timer.
TIMER SET/O FF_AD X _
Used to set or cancel \ _, X
the minute tirner_"The _ _
minute timer doe_ C) _ _' 3(_)_ _1;_'_
start or stop cooking_--,_,,,_ \_
CLOCK SET COOK TIME UP and DOWN ARROWS PADS Used ADD 1 MINUTE PAD Used to add 1 BAKE PAD--
PAD Used to PAD Used to along with the function pads to select minute to the Timer Count-down. This Used to select
set the time enter the length oven temperature, cook time, start time feature works with the Kitchen Timer the bake
only and does not affect any cook time function.
or start time functions. (some models).
INDICATOR
LIGHTS--
These light to
show which
feature is in
use.
• •
Also, TIMER SET/OFF _
Pad is used to set the _ ® ® ® BROIL PAD--
Continuous Bake _ _ _ _'X _ Used to select
Feature. _lleea ct) (_sfte_oer) _ ® Oven _t_ the variable broil
SELECT SELF- _ W _ ® Prehea{ function.
CLEAN PAD Used to _ @ Beerlocked WARM & HOLD
select the Self- _OVE /_ PAD-- Used to
Cleaning cycle. A 2, 3 set the Warm &
or 4 hour Self-Clean Hold feature.
time may be selected
(some models).
N, PREHEAT & DOOR LOCK LIGHTS* The "Oven" light STOP CLEAR PAD-- Used to clear
will glow each time the oven unit turns on to maintain the set any function previously entered
DELAY START PAD Used to set the
oven temperature. The "Preheat" light will glow when the oven except the time of day and minute
desired start time for baking. May be
is first set to operate, or if the desired temperature is reset timer. Press STOP CLEAR to stop
used with COOK TIME to program a higher than the actual oven temperature. The "Door Locked" cooking. Also the STOP CLEAR
delayed bake cycle or a delayed clean light will flash until the door locks when the self-clean cycle is in pad is used to activate oven lockout
cycle, use. It glows constantly after the door locks (some models), setting. (some models).
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature.
When preheat indicator light turns OFF, your oven is ready.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pressed. Ifdesired, the control can be programmed
for silent operation.
1. To tell if your oven is set for normal or silent operation press and hold _ for 7 seconds. "== " or "SP" appears in
the display.
2. Within 5 seconds, press the A or v pad to switch between normal sound operation and silent operation mode.
The display will show either "- - " or "SP".
3. Wait 5 seconds to return to normal operating mode.
If "SP" appears, the control will operate with normal sounds and beeps. If "- - " appears, the control is in the silent
operation mode.
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press and hold for 7 seconds until °F or °C appears in the display.
2. Press the/,,, or v pad to change °F to °C or °C to °F.
3. Wait 5 seconds to accept the changes or press __ to reject the
changes.